Synthesis of molecular ferromagnetics [R3R′X]MCr(C2O4)3 (X = N,R = Bun,R′ = Prn,Et, Me; X = P,R = Ph,R′ = Bun; M = Mn,Fe, Co,Ni, Cu)

The synthesis, IR spectra, and the temperatures of the transition into a ferromagnetic state (T _c) of layered ferromagnetics [R₃RX[MCr(C₂O₄)₃ (M = Mn, Fe, Co, Cu, and Ni) with the [Ph₃BuP]⁺, [Bu₃RN]⁺ (R = Pr, Et, and Me) cations capable of subsequently changing the distances between metallooxalate layers have been considered. The temperatureT _c has been found to be independent of the size of the organic cation. It is believed that the determining factors in the transition to a ferromagnetic state are exchange interactions inside the metallooxalate layer.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 2327–2330, September, 1996.     

Highly Selective Salicylate Membrane Electrode Based on N,N＇- （Aminoethyl）ethylenediamide Bis（2-salicylideneimine） Binuclear Copper（Ⅱ） Complex as Neutral Carrier

A new ion selective electrode for salicylate based on N,N＇-（aminoethyl）ethylenediamide bis（2-salicylideneimine） binuclear copper（Ⅱ） complex [Cu（Ⅱ）2-AEBS] as an ionophore was developed. The electrode has a linear range from 1.0 × 10^-1 to 5.0 ×10^-7 mol·L^- 1 with a near-Nemstian slope of （ - 55 ±1 ） mV/decade and a detection limit of 2.0 × 10-7 mol·L^-1 in phosphorate buffer solution of pH 5.0 at 25 ℃. It shows good selectivity for Sal^- and displays anti-Hofmeister selectivity sequence： Sal^-〉SCN^-〉 ClO4^- 〉I^-〉 NO2^- 〉Br^-〉 NO3^- 〉Cl^-〉 SO3^2- 〉 SO4^2- The proposed sensor based on binuclear copper（Ⅱ）complex has a fast response time of 5-10 s and can be used for at least 2 months without any major deviation. The response mechanism is discussed in view of the alternating current （AC） impedance technique and the UV-vis spectroscopy technique. The effect of the electrode membrane compositions and the experimental conditions were studied. The electrode has been successfully used for the determination of salicylate ion in drug pharmaceutical preparations.     

Studies on synthesis and kinetics of thermodecomposition of the nickel(Ⅱ) compounds with Schiff base derived from amino acids

Monoaqua salicylaldehyde-o-aminobenzoic acid Ni(Ⅱ) monohydrate (cp1) and monoaqua o-vanillin-o-aminobenzoic acid Ni(Ⅱ) monohydrate (cp2) were synthesized. The composition and structures of these two compounds were analyzed. Their thermal stability and non-isothermal kinetics were also investigated by use of TG and DTG curves. The possible reaction mechanisms in their first steps of thermal decomposition reactions were deduced by means of integral and differential methods. Thermodecomposition kinetic equations of the compounds are as follows:Cp1: da/At = A . exp(-E/RT) . 3/2(1 - a)4/3 . [1/(1 - a)1/3 -1]-1 Cp2 : da/At = A . exp(-E/RT) . (1 - a)     

Biodegradable and pH-sensitive hydrogels: Synthesis by crosslinking of N,N-dimethylacrylamide copolymer precursors

Novel pH-sensitive hydrogels containing azoaromatic crosslinks were synthesized by the crosslinking of polymeric precursors. First, a reactive polymeric precursor was synthesized by copolymerization of N,N-dimethylacrylamide, N-tert-butylacrylamide, acrylic acid, and N-methacryloylglycylglycine p-nitrophenyl ester. The hydrogel was prepared in the second step by the reaction of the polymeric precursor with N,N′-(ω-aminocaproyl)-4,4′-diaminoazobenzene. The hydrogels were characterized by the network structure, (that is, content of crosslinks, unreacted pendent groups, and cycles), the equilibrium swelling ratio as a function of pH, modulus of elasticity in compression, and the degradability in vitro. The results obtained indicated that the hydrogel network structure strongly depends on the reaction conditions such as polymer concentration, and the ratio of the reactive groups during the crosslinking reaction. The swelling and mechanical properties of hydrogels can be controlled by the modification of polymer backbone structure and/or the crosslinking density. The rates of hydrogel degradation depended on their degree of swelling. The higher the degree of swelling, the higher the degradability. The properties of the hydrogels suggest that they have a potential as carriers for colon-specific drug delivery. © 1994 John Wiley & Sons, Inc.     

The relative permittivity of 1,2-dimethoxyethane and N,N-dimethylformamide mixtures from −10 to 40°C

Binary solutions of N,N-dimethylformamide and 1,2-dimethoxyethane have been investigated by means of dielectric measurements at temperatures ranging from –10 to +40°C, and for nine mixtures covering the whole miscibility field expressed by the mole fraction of one component (0X₁1). The experimental data were used to study the dependence of on T and X₁, of the type = (T), = (X₁), and = (T,X₁). Further, the excess mixing function _E has been evaluated in order to identify particular patterns of interaction between unlike molecules and any other factor that could modify such patterns. The minimum in the _E vs. composition plots suggests the formation of an adduct of stoichiometric ratio DMFDME=11 at all the investigated temperatures.     

Dicholorbenzyl alkyl ether homologs as retention index markers and internal standards for the analysis of environmental samples using capillary gas chromatography

A homologous series of 2,4-dichlorobenzyl alkyl ethers (DCBEs) have been synthesized and purified for use as retention index calibrants and internal standards. They are stable, sensitive to ECD and FID and ideal for GC-MS, with base peaks at m/z 159/161. The retention index calibration against the n-alkanes for a linear temperature program (LTP) series is given and recommendations made for the most suitable members of the DCBE series for use as internal standards in organochlorine (OC) residue analysis.     

On the affinity of cytosine towards electrophiles

Ab initio SCF computations on the intrinsic preferences of the H⁺, CH ₃ ⁺ and C₂H ₅ ⁺ cations towards the two principal sites of protonation or alkylation on cytosine, N₃ or O₂, show that this preference undergoes a continuous modification with the increase in size and complexity of the cation. N₃ is the preferred site of fixation of H⁺, O₂ the preferred site of C₂H ₅ ⁺ , while CH ₃ ⁺ has no marked preference. The exchange repulsion term of the binding energy appears responsible for the preference of C₂H ₅ ⁺ for O₂.This work was supported by the Ligue Francaise contre le Cancer and the National Foundation for Cancer Research (USA)     

共沉淀法合成稀土正磷酸盐(La,Gd)PO4:RE3+(RE=Eu,Tb)及其真空紫外光谱特性

采用共沉淀法制备了稀土正磷酸盐荧光粉(La,Gd)PO4:RE3+(RE=Eu,Tb).红外光谱分析发现GdPO4的红外光谱吸收峰与LaPO4一致,只是峰位向高波数方向移动.(La,Gd)PO4:RE3+的真空紫外光谱特性研究表明,Gd3+在能量传递过程中起中间体作用.XPS研究揭示,LaPO4的价带由O2-的2p能级构成,而GdPO4的价带则是由O2-的2p能级和Gd3+的4f能级共同构成.     

Methylation of Chitosan with Iodomethane: Effect of Reaction Conditions on Chemoselectivity and Degree of Substitution

N,N,N‐trimethylchitosan (TMC) was prepared by reacting purified chitosan with iodomethane, in the presence of sodium hydroxide, water and sodium iodide, at room temperature. The reaction medium was N‐methyl‐2‐pyrrolidone. Different samples of TMC were obtained by adding to the reaction medium a fixed volume (5.5 mL) of aqueous NaOH solutions at different concentrations (15, 20, 30 and 40 wt.‐%) and carrying out the reactions for 9 or 24 h. The features observed in the ¹H and ¹³C NMR spectra of these chitosan derivatives, in respect of the chemical shift, number and relative intensity of the signals, depended strongly on the excess of NaOH and H₃CI added to the reaction medium, but when the lowest excess was employed, the characteristics of the derivative were not affected by the reaction time to the same extent. The average degree of quaternization of these N‐methylated derivatives of chitosan ranged from 10.5% to 44.8%, according to the reaction conditions. Increasing the excess of NaOH, in reactions carried out for 9 h, resulted in TMC samples with progressively higher content of trimethylated sites however, the reaction yields were correspondingly lower and O‐alkylation was favored in these cases.

¹H NMR spectrum of sample [A_X]^24h dissolved in D₂O (C_p = 10 g/L).     

Synthesis of New Fluorinated Derivatives of Quinolinecarboxylic Acids

Ethyl esters of 1-(7-Z-1-ethyl-6-fluoro-4-oxo-1,4-dihydroquinoline-3-carbamoyl)-5-X-6,7,8-trifluoro-4-oxo-1,4-dihydroquinoline-3-carboxylic acids (X = H, F; Z = pyrrolidino-, piperidino-, hexamethylenimino-, morpholino-, thiomorpholino-) have been synthesized by the interaction of quinolone-3-carboxylic acid hydrazides with ethyl esters of 3-ethoxy-2-(polyfluorobenzoyl)acrylic acid . It was shown possible to cyclize intramolecularly the esters obtained with the formation of 1,3,4-oxadiazino[6,5,4-i,j]quinoline derivatives.